Rigmanufacturer

DCN Series Desilters

DCN Series desilters are one of the important equipment of controlling the solids in the drill fluid. The action is to remove the harmful solids, promote the drill fluid performance and separate 15 ~ 47 µm solids particles accounting for over 60 % of solids quantity.

When the quick drilling is made in the soft formation, the shaker only can remove large solids particles, but the desilter can remove fine solids particles, fully promoting the solids control efficiency. Therefore, it is especially suitable for the well site where the formation is considerable hard and the drilling speed is slower so that the cuttings is very fine in particle size.

Model DCN100 x 8 Shaker Parameters Vibration pattern:
Eccentric shaft vibrator
Vibrating speed: 1,420r/min
Screen mesh counts: 120 ~ 150
Screen area: 1,400 x 420 mm2 (55.1 x 16.5in2)
Motor model: YB100L-4
Motor power: 2.2kW (3HP)
Cyclone diameter mm (in) 100(4)
Cyclone number (pcs) 8
Mud feed pipe diameter mm(in) 150(6)
Overflow outlet diameter mm(in) 150(6)
Separated particle size (?m) 15 ~ 44
Working pressure MPa (psi) 0.30 ~ 0.40 (43.5 ~ 58)
Desilting capacity l/s (US gal/s) 26 ~ 56(7 ~ 15)
Overall dimensions (L x W x H) mm (in) 1,615 x 910 x 1,715(64 x 36 x 67.8)
Total weight kg (lbs) 500(1,100)
Desilter of drill fluids